Stop Tank Overflow With

Automatic Pump Controller

   Buy Now

DG-Pump: Fully Automatic Pump Controller

We are manufacturer of DG-Pump, Digital fully Automatic Water Pump Controller for your home and Industry. It continuously monitors the liquid level of the overhead tank and reservoir. The Automatic pump controller controls the water pumps and turns it ON and OFF with respect to the level in the water tank. This auto-switching feature saves manpower. Hence no need to operate manually. Our system switches the pump when the level of water in the tank goes below LOW level and OFF when the water exceeds the HIGH level. Thus no wastage of water and can save electricity bill and water charges.

Switches ON the pump when the water in the overhead tank goes below the pre-decided minimum level.
Switches OFF the pump when the water level in the overhead tank reaches the maximum level therefore prevents overflow.
Switches OFF the pump when the water level reaches the minimum level in the under ground tank therefore prevents dry running.
Shall again switch ON the pump when there is sufficient water in the underground tank.
Therefore no need to switch ON or switch OFF the pump manually.
No more Overflow or Dry run thus saving water electricity & manpower.

Technical Specification:

Supply Voltage: 230 V AC, 50 Hz.
Internal Voltage: 12V DC
Output: 2 potential free relay contact
Contact rating: 23 Amp. for Pump On relay and
    7 Amp. Pump Off relay
Power Consumption: 1.2 Watt
Monthly Consumption: 1 Unit
Temperature: -20 to + 70 degree Celsius
Dimension: 172mm * 85mm * 62mm.
Weight: 860 gm.


Multi-storied apartments
Hotels and restaurants
Commercial centers All places with water tank